LiPo Battery 7.4VDC 1300mAh

Max 2 per order

Lithium-ion polymer robot battery provides power to your ezrobot or EZ-B v4/2 Wi-Fi Robot Controller.


LiPo Battery Balancer Charger

Recommended balancer charger for our LiPo Robot Battery 7.4v 1300mAh. This balancer charger monitors the voltage of each cell in a pack and varies the charge on a per-cell basis so that all cells are brought to the same voltage, so your batteries last longer.


Alternate Power Adapter

This adapter is used with the ez-bv4 power base to attach a battery pack. No soldering required!


6xAA Battery Holder

This battery holder takes 6 AA batteries, for 9 volts to power small-to-medium sized projects. You can connect these in series or parallel to double the amperage or voltage to drive your servos and motors. Power adapter sold separately. This item requires a Alternate Power Adapter to connect with the Power Shell.


Inline 5V Regulator (30cm)

This voltage regulator has the simple task of taking a large voltage and converting it to a smaller voltage – in this case, 5VDC. This regulator also adds the convenience of quickly interfacing a 5V servo or sensor to an ez-bv4 with it’s standard 3 wire interface.


Power Shell

The power shell is a holder for your EZ-B v4/2 Wi-Fi Robot Controller. It lets you use your ez-bv4 outside of a robot body. The power shell contains a 20 amp fuse and barrel jack, which supplies power. Like the bodies of all Revolution robots, the size of the shell was designed to enhance the audio of the ez-bv4's internal speaker. Connect an Alternate Power Adapter and 6xAA Battery Holder to provide power to the Power Shell.


LiPo Battery Harness

LiPo to EZ-B v4 adapter for powering the EZ-Robot Developer Kit and Power Base. Connect any LiPo 7.4 battery to the EZ-B Power Base with this harness.